Our electricians have been serving the residential and commercial service needs in St. Paul for more than two decades. We’re proud to be able to offer you our quality electrical repairs, wiring installations, safety inspections, and more.
-
Free Estimates & Consultation
-
23+ Years of Local Experience
-
Dedicated to Your Complete Satisfaction
Local St. Paul Electrical Contractors
With 4Front Energy Corporation, you can be sure the work our electrical contractors do is accurate and on-target to solve the problems you’re having. We’re your local experts in troubleshooting electrical problems and providing you with the right solution.
Electrical Repairs
One important way to make sure your St. Paul home’s electrical system is safely supporting your power needs is to ensure the electrical repairs are done as soon as you realize there’s a problem.
Electrical repairs may include fixing outlets, repairing the wiring in ceiling fans, replacing light fixtures, or troubleshooting an unidentifiable problem. Our electricians can help you with all these electrical repairs and more! Give us a call so we can make sure your system is operating safely and efficiently!
Local Professionals with a Proven Process
Step #1
Contact
Fill out a quick form to tell us a bit about how we can help. We’ll reach out to get started.
Step #2
Consultation
Set up an appointment with our estimator to develop the best plan for your electrical project.
Step #3
Proposal
We’ll provide you with a free estimate detailing the work to be done.
Step #4
Installation
Our fully licensed electricians will complete your installation or repair efficiently and answer any questions you may have.
Our Commitment to Service & Quality
We take pride in our Minnesota values of honesty, safety, respect, and quality workmanship. Installing only the best products, we stand by our work on every project.
Derek – Master Electrician
Electrical Safety Inspections
Whether your St. Paul home is older or newer, electrical safety inspections are an important service to get done on a regular basis. By regular, we mean your main service panel should be professionally inspection by a master electrician who’s certified about every five to ten years.
If it’s been a while since you’ve scheduled an electrical safety inspection for your home, it’s time to call our expert electricians for service.
Keep Your Home & Car Running The Way it Was Meant To Be
Recent Jobs and Reviews in Saint Paul, MN
Job Locations and Reviews
Reconfigured door access control system in outer vestibule by resetting the locking schedule as requested. Troubleshooted and reprogrammed the controller labeled "FRONT DOOR" that was not functioning properly at location 1077. Successfully restored automatic nightly locking functionality to all entrance doors.
Performed a 320-amp overhead service upgrade, installing a new emergency disconnect meter enclosure, service mast, and dual 150-amp panels in the basement with complete circuit reconnection. Additionally, installed required NEC-compliant grounding with two 8' ground rods and whole home surge protection, plus added two new AFCI/GFCI protected circuits with multiple receptacles for customer's music equipment.
Completed a 200 amp overhead service upgrade, installing new meter enclosure, service mast, and weatherhead at existing outdoor location. Installed new 40-space main electrical panel in basement with all new circuit breakers while maintaining existing circuit protection, along with whole home surge protection and proper grounding via dual 8' ground rods. Also installed 30 amp dedicated wiring with junction box for water heater in unfinished basement ceiling area.
Successfully installed the customer-supplied Emporia EV charger, replacing the previous Enel X Juicebox unit. Added dedicated circuit in main electrical panel with proper labeling for the Honda charging system. Completed final inspection with all connections verified for proper operation and safety compliance. Removed the old Enel X Juicebox unit to be returned to Electrum per instructions.
Diagnosed and replaced faulty undercabinet lighting system in kitchen. Identified loose wiring connections inside cabinets that had caused illumination failure. Restored functionality to all lighting fixtures after securing connections and testing operation.
Successfully installed and programmed a ChargePoint Home Flex CPH50 electric vehicle charging station (SN: 2519G2031865) for customer's Volkswagen ID.4 (2023). Hardwired the unit to an existing 240V circuit and verified proper functionality. Connected customer to vendor application with activation code AcclathomeMN.
Replaced existing power vent water heater with new Bradford White G2 50-Gallon Electric Hybrid Heat Pump Water Heater (M# RE2HP5010-1NCTT). Relocated unit for improved accessibility near exterior wall and electrical panel, disconnected gas line and capped, installed new water isolation shut-off valves to code, and connected condensate line to floor drain in laundry room. System tested with no leaks detected.
Successfully completed a 200 amp electrical service upgrade, installing a new outdoor meter enclosure with extended service mast to meet NEC clearance requirements. Replaced the existing panel with a new 200 amp 40-space main electrical panel in the unfinished basement, reconnecting all circuits with new breakers, and installed a whole home surge protective device along with proper grounding using two 8' ground rods and bonding to the water meter.
Completed installation of customer-supplied LED and exterior fixtures. Installed multiple receptacles including one in 2nd floor bedroom. Verified proper outlet function with testing equipment and confirmed illumination of installed fixtures. Examined keypad on garage experiencing issues during cold weather for potential wiring problems.
Completed electrical installation work for kitchen remodel including the relocation of refrigerator outlet, installation of new 220V outlet for dryer and 120V outlet for washer in stacked configuration. Installed six code-compliant GFI-protected countertop outlets on existing arc-faulted circuits, relocated gas range outlet, and wired new range hood. Toe kick heater installation pending arrival of unit.
Diagnosed and resolved power issue to ceiling fans in front shop area by identifying disconnected switch leg. Reconfigured wiring in ceiling junction box for proper circuit connectivity and replaced both the fan switch and a receptacle to restore full functionality.
Completed comprehensive electrical work in bathroom renovation, including installation of new vanity light with dedicated switch, bathroom exhaust fan with timer control, and code-compliant dedicated circuit GFI outlet. Removed existing porcelain light fixture and relocated doorbell transformer. Work involved fishing wiring from basement panel through ceiling and crawl space to access bathroom. All installations completed with proper electrical permits and inspections.
Conducted electrical safety check and identified multiple issues. Resolved non-functioning 3rd floor lighting and 2nd floor bath vanity light through switch replacement. Recommended bathroom fan/light replacement and installation of GFCI protection for basement circuits, documenting all findings in the safety check form.
Installed and configured a ChargePoint Home Flex EV charging station for a 2023 Chevrolet Bolt EUV, utilizing an existing 240V circuit. Connected the unit to the electrical panel, verified proper circuit protection, and confirmed successful operation as indicated by the green status light. Setup completed with ChargePoint app integration (code: AcclathomeMN).
Installed a ChargePoint EV charging station with load management capability in a 100A electrical panel. Implemented a Load Management Device (LMD) to automatically disable the charger when household consumption exceeds capacity, ensuring code compliance. Converted existing NEMA 14-50R receptacle to a junction box, hardwired the unit for 40A output (50A fused), and configured the charger's WiFi connectivity and app settings.
