From electrical repairs, lighting installation, and rewiring to new construction electrical installation and HVAC wiring, the variety of services we offer span many areas of electrical services for your home or business.
-
FREE Electrical Safety Check
-
1 Year Work Full Guarantee
-
XCel Energy Preferred
Quality workmanship by licensed and insured professionals
Our electricians do all your electrical repairs and other work personally. All our materials are of the highest quality and our quality workmanship offers you a safe and efficient electrical system.
Let our electricians ensure you get your home or business electrical needs done right. Give us a call if you’d like to set up a free consultation and estimate at your location in Minneapolis!
Providing Minneapolis with Electrical Repairs
Our electrical contractors take every project seriously and strive to provide you with the highest level of quality work. We understand how serious electrical repairs are for you and your family. We take pride in the work we do and want your electrical repairs to be done right so you can depend on your lights or other components to function safely.
Local Professionals with a Proven Process
Step #1
Contact
Fill out a quick form to tell us a bit about how we can help. We’ll reach out to get started.
Step #2
Consultation
Set up an appointment with our estimator to develop the best plan for your electrical project.
Step #3
Proposal
We’ll provide you with a free estimate detailing the work to be done.
Step #4
Installation
Our fully licensed electricians will complete your installation or repair efficiently and answer any questions you may have.
Our Commitment to Service & Quality
We take pride in our Minnesota values of honesty, safety, respect, and quality workmanship. Installing only the best products, we stand by our work on every project.
Derek – Master Electrician
Electrical Safety Inspections and Wiring Services
Our electricians are highly trained and experienced to ensure your electrical panel, circuit breakers, wiring, and lighting, and more are safe and properly suited for your home. For electrical safety inspections and service that is second to none, call our Minneapolis electricians today!
We use only the best materials and quality workmanship when taking care of the electrical needs of our customers, and we make sure that our team of electricians are continuously educated in order to stay current with today’s electrical code standards and technology advances. We offer all this at a fair and highly competitive price.
Keep Your Home & Car Running The Way it Was Meant To Be
Recent Jobs and Reviews in Minneapolis, MN
Job Locations and Reviews
Performed comprehensive prepaid maintenance service on multiple heating systems including furnace, in-floor heating boiler, gas fireplace, and humidifier. Conducted thorough inspection and cleaning of all components, including blower assembly and circuit boards. Systems are now functioning properly with all connections verified and safety checks completed.
Performed prepaid heating maintenance on one furnace, one humidifier, and one gas heater. Detected slightly elevated carbon monoxide levels and high gas pressure; adjusted gas pressure to proper specifications. Inspected Aprilaire humidifier system with all indicator lights functioning normally.
Responded to service call for one-year-old Lennox furnace that failed to reach setpoint overnight (stuck at 67°F despite 71°F setting) with error code 67 displayed on thermostat. Performed system reset which resolved the error condition. Conducted diagnostic testing with Testo 310 analyzer and UEi EM720 meter to verify proper system operation. System now functioning normally with no error codes present.
Responded to customer's complaint of furnace underperforming (set at 67°F but only reaching 64°F). Diagnostic testing revealed multiple component failures affecting system efficiency. Observed proper blue flame pattern through inspection port but insufficient heating capacity. Recommended and performed complete system replacement as repair of failing components would not restore proper functionality.
Performed scheduled heating tune-up on customer's furnace. Completed comprehensive system maintenance including cleaning and inspection. Noted bathroom exhaust fan in good working condition with no visible damage or moisture issues.
Responded to high pressure concerns in boiler system (25 psi) with observed water discharge from pressure relief valve. Inspection revealed corroded pressure relief valve and compromised Amtrol expansion tank. Diagnosed system overheating issues affecting upper floor temperature regulation. Provided customer with comprehensive solution recommendations including expansion tank replacement, air separator installation, and possible thermostat upgrade to resolve pressure fluctuations and improve temperature control.
Completed prepaid heating tune-up service on furnace system with integrated humidifier and gas fireplace. Performed comprehensive diagnostic testing with temperature/humidity meter (BM720) and combustion analyzer (Testo 310) to verify system parameters. Identified intermittent pressure switch issue; customer was advised of recommended replacement.
Performed scheduled heating tune-up on customer's HVAC system, which included maintenance on one furnace, one in-floor heat boiler, one humidifier, one HRV (Heat Recovery Ventilator), and one GFP. Cleaned and serviced the Clean Comfort Indoor Air Quality system, replacing severely clogged filter that showed significant dust and debris accumulation to restore proper system function and air quality.
Responded to after-hours no heat call where home temperature had dropped to 54°F. Diagnosed system failure due to faulty pressure switches and collector box. Completed full replacement to restore proper heating function.
Responded to gas fireplace service call to address a leaking gas shutoff valve. Upon inspection, confirmed active leak at the valve assembly. Successfully replaced the defective gas shutoff valve with a new unit, restoring safe operation to the fireplace system.
Performed scheduled preventative maintenance on two boilers in the gas-fired heating system. Inspected system pressure gauges and confirmed proper operating range. Cleaned both units, examined flue pipes for proper ventilation, and verified all piping connections were secure with no signs of leaks.
Responded to commercial learning center with no heat complaint. Diagnosed Navien boiler failure due to faulty ignition system. Replaced igniter component and verified proper system operation with successful flame initiation and normal heating function restored.
Performed fall maintenance on furnace system and humidifier per prepaid agreement. Inspected humidifier mounted on ductwork and noted normal installation with proper connections. Observed copper water line to humidifier showing oxidation, which is within normal parameters but will require monitoring. All components functioning as designed after service.
Responded to after-hours service call for Trane XR95 furnace with no heat complaint. Diagnosed faulty capacitor as root cause. Replaced capacitor, restoring furnace operation.
Completed PA heating maintenance on customer's hydronic system consisting of one boiler with circulation pump, one Unico attic air handler, and two gas fireplaces. Inspected system operation with temperature readings at approximately 50°C on Honeywell gauge, verified all components functioning properly, and confirmed no issues with plumbing connections. Plumbing technician also on site during service visit.
Replaced faulty high limit safety switch on furnace after diagnosing system issues including a defective circuit board and transformer. Visual inspection of blower motor assembly and gas valve components confirmed proper installation of replacement parts, restoring safe operation with 1-year guarantee on workmanship.
Performed comprehensive heat exchanger cleaning on NTI TX101 boiler utilizing specialized vinegar and Fernox F3 cleaning solutions to restore optimal heat transfer efficiency. Post-service combustion analysis with Testo 310 analyzer confirmed improved performance with stack temperature at 130.6°F, Oâ‚‚ level at 20.3%, and CO concentration at 38 ppm.
Completed prepaid heating maintenance visit on single furnace system with associated components. Serviced humidifier, UV light, and electronic air cleaner (EAC). Verified all equipment functioning properly with no issues found during inspection.
Responded to service call for non-functioning Triangle Tube boiler displaying error code E28. Upon inspection, found control panel inoperative with system in standby mode. Diagnosed issue with Honeywell control module and wiring connections. Reset system, checked pressure gauge readings, and confirmed proper operation of digital display interface. Located replacement parts needed to resolve fault code E28. System now operational with house temperature returning to normal range.
Responded to service call for illuminated error light on humidifier unit located in basement utility area. Diagnosed system requiring maintenance - performed complete drainage procedure of accumulated water/sediment and successfully restored normal operation. Unit tested after service with error light resolved.
